DFRobot DRI0009 2A Motor Shield Arduino Compatible

Item# DRI0009

2A Motor Shield Ardiono Compatible

This  DFRobot Arduino Compatible Motor Shield (2A) uses L298P chip which allow to drive two 7-12V DC motors with maximum 2A current. This shield can be directly mount onto standard Arduino Duemilanoveand Arduino Mega.

The speed control is achieved through conventional PWM which can be obtained from Arduino’s PWM output Pin 5 and 6. The enable/disable function of the motor control is signalled by Arduino Digital Pin 4 and 7. The Motor shield can be powered directly from Microcontroller or from external power source. It is strongly encouraged to use external power supply to power the motor shield.

Specification

• Logic Control Voltage 5V (From Microcontroller)
• Motor Driven Voltage 6.5~12v(VIN Power Supply),4.8~35V (External Power Source)
• 2 way motor drive
• Logic supply current Iss≤36mA
• Motor Driven current Io≤2A
• Maximum power consumption 25WT=75W
• Up to  2A current each way
• Pin 4,5,6,7 are used to drive two DC motor 
• Support PWM speed control 
• Support PLL advance speed control
• Size: 55x55mm

Compatibility

• Arduino UNO 
• Arduino UNO R3
• Arduino Mega 1280/2560